ASH TRAY AND CIGARETTE LIGHTER INSTALL GUIDE
94-97
Honda Accord
This install guide is intended for use by LEDautomotive.com customers and winners of eBay auctions by entcee. We cannot guarantee a successful LED conversion with items not purchased from us. |
*Please
read this all the way through before doing this install!*
We
will not be held responsible for any mistakes, problems, or damage
done to any part of your car. Follow this install guide carefully,
and you should have no problems. If you are unsure about ANYTHING,
please email us. We will
help you out to the best of our ability. |
| Here
Is What You Will Need:
|
- Phillips head screw driver
- Flat head screw driver |
| Follow the steps in the Climate Control Install Guide [Here] to remove the stereo trim piece and get to the ash tray and cigarette lighter.
 On the back of the stereo trim piece twist out both of the stock bulb holders. There is one in the ashtray and one in the cigarette lighter. Pull the bulbs out of the holders.
Install the wedge LEDs and test to make sure they come on. If one of the LEDs do not light up just take it out and rotate it 180 degrees and try it again.
Once all the lights light up, reassemble everything in reverse order.
If
you have any questions, feel free to email me at Nate@LEDautomotive.com.
|
|
|
