98-02 Honda Accord Odometer Wedge LED Install Guide

ODOMETER WEDGE LED INSTALL GUIDE
98-02 Honda Accord

This install guide is intended for use by LEDautomotive.com customers and winners of eBay auctions by entcee. We cannot guarantee a successful LED conversion with items not purchased from us.

*Please read this all the way through before doing this install!*

We will not be held responsible for any mistakes, problems, or damage done to any part of your car. Follow this install guide carefully, and you should have no problems. If you are unsure about ANYTHING, please email us. We will help you out to the best of our ability.

Here Is What You Will Need:

- Phillips head screw driver

Let's Get Started

First remove the 2 screws on the under side of the top of the trim piece and pull the trim piece off. (It is held in with 2 clips on the bottom corners)

Next remove the 4 screws that hold in the gauge cluster and tilt if forward to disconnect the wire harnesses.

Once the gauge cluster is removed, look at the back of it. The blue arrow points to the bulb holder that lights up the odometer.

Turn the bulb holder 1/4 of a turn counter clock wise, and then pull it straight out. Remove the bulb, and insert the Wedge LED into the bulb holder. Put the assembly back into the cluster, and put the cluster back in the car.

Connect the connectors to the cluster, and test to see if the odometer lights up. (Turn the key into the on position.) If it does not light up, take the cluster out. Twist the bulb holder counterclockwise, and pull it up just enough to keep turning it counter clockwise until it falls back into place. Once it falls into place, turn it clockwise to secure it.

Put everything back together.

If you have any questions, feel free to email me at Nate@LEDautomotive.com.